Skip to main content
 

ERGO 5100 Activator

Stock code 5100

ERGO

The accelerator ergo 5100 should be applied at least two minutes before the glue will be used, usually on one side of the joint.

In order to get highest strength, the solvent must be evaporated totally, before the glue may be applied.

The use of this surface activator is recommended whenever unfavourable conditions for an optimal cure are not present. These can be caused be inactive surfaces, large gaps, extreme porosity or large open surfaces, such as can occur when screens are bonded to frames. This activator facilitates, accelerates the proper cure of all ergo cyanoacrylate adhesives in these cases.